Copyright © Sinor Electronic device Co., Ltd. All Rights Reserved
粤ICP备16001692号 Support:300.cn zhuhai
Solution
SALP-350-C Type automatic online labeling machine
project |
Requirements specification |
General requirements |
|
Installation dimensions |
L1160* W1245* H1600 |
The power supply |
communication 220V,,50Hz; |
Air supply demand |
4-6 kgf/cm^2 |
The weight of the |
about 140Kg |
Appearance of the color |
Grey white (available upon request) |
The grounding impedance |
<4Ω |
The environment temperature |
23~27 Celsius, mean 25 Celsius |
Relative humidity |
No greater than 70% |
Insulation impedance |
>150MΩ |
Maximum noise at work |
< 85 db |
Label feeding and labeling system |
|
Feeding way |
The finished label is rolled up to the automatic stripper Feeder 上 |
Label size range |
L=25mm, W=5 mm |
Feed speed |
No greater than 1 seconds |
Label feeding time and testing |
Max 3 minute, may advance the early warning supplementary materials |
Label type can be changed easily |
Max 15min |
Feeder requirements |
Roll label diameter min 350 mm |
Label position accuracy |
±0.5mm |
Label repeat accuracy |
±0.3mm |
PCB The size range of the board(W*L) |
50 x150 mm ~ 350 x 420 mm |
Way to learn |
Vacuum absorb,Two probe heads |
Multiple label selection |
The same block Panel Stick multiple labels of the same size but with different angles |
Label Angle can be attached |
0、90、180、270 The degree of |
capacity |
The device has reached speed UPH Requirements:13 Gold standard /points |
The software system |
|
Programming interface |
Intuitive and understandable, Chinese interface, configuration DELL Computer mainframe and LCD, keyboard and mouse, etc |
In the school functions |
The location of the label can be passed through the software+The cantilever movement is calibrated |
communication |
The feeder communicates with the label head, and the scan results can be uploaded to the network system |
Safety and control system |
|
Safety design |
Full closed box appearance, transparent glass window door can open, with emergency stop switch |
The control mode |
The grain of sichuan PLC Program controller control |
standard SMEMA Even the machine interface |
2 A female plug, 2 A male plug,2 Meters long connection |
In and out of the plate IO The signal interface |
In and out board each a set of photoelectric sensor, using omron brand |
Alarm function |
On the card board, such as leakage and other abnormal realization of audible and visual alarm |
Touch screen control interface |
Adopt hechuan touch screen |
Barcode scanning |
Equipped with bar code scanner, can automatically scan and upload customer system online |
other |
The part that may cause harm to human body installs safety protective cover |
Transmission positioning system |
|
Transmission way |
automatic CV Transmission track,ESD Belt driven by fast stepper motor |
Track width |
50mm ~ 350mm Adjustable hand wheel adjustment |
Positioning wayLabel the arm movement system |
Servo cylinder block+The photoelectric switch is positioned and the barrier is SMC Brand, photoelectric switch for omron brand |
SALP-350-C Type automatic online labeling machine prototype photos